AT+LED
- smokku
Working on RGB leds support on DEV-board.
This is how we roll…
It turns out I’ve connected RGB LEDs wrong… (don’t ask… 🤦🏻♂️)
In order to work on LEDs support in firmware, I’ve disabled on-board ones
(there’s a PCB jumper for this) and wired an external LED board.
Since the RGB LEDs are connected to ESP32, which is running esp-at firmware,
in order to set LED colors, I needed to implement new AT command to set LEDs values.
Introducing: AT+LED=3,28,224,0
